CenturyLink Router IP and Login Instructions

To login and configure your CenturyLink router you will need 2 things:

  1. IP address of your CenturyLink router
  2. Username and password

This guide will show you how to aqcuire both, and how to use them for logging in to your router.


Step 1: Find out your CenturyLink router's IP

First we will need to figure out the IP address of your router.

Here you have 4 easy options. There are also harder ways, but why bother with those?

a) Use our web tool while connected to your router

The far easiest way, provided that you have access to connect to the network of the router, is to go over to our automatic tool page and it will find your CenturyLink router's IP in a jiff.

Auto find IP address

b) Try the most commmon default IPs for CenturyLink

Comparing all CenturyLink models, these are the most common default IP addresses:

  • 192.168.2.1

c) Try the most commonly reported IPs for CenturyLink

1019 users of our tool have reported the IP addresses for their CenturyLink routers and here is the summary of the most common addresses.

IP address Reports %
192.168.0.1 650 63.8
192.168.1.1 175 17.2

d) Lookup the defaults for your sepcific model

In the next step where you can lookup the username and password for your specific CenturyLink model, you will also see the default IP address for that model.


Step 2: Find out the credentials (username & password) for your CenturyLink router

If you don't know the username and password to your router, you can find it out in the following way. This only works as long as you haven't changed the username and password previosly.

If you, or someone, has changed the default password and can't remember it, you might have to perform a reset of your router to get it back to the default values. See here how to reset your CenturyLink router here.

a) Check the sticker on your router

If you take a peek at the bottom or backside of your CenturyLink router you will see find a sticker. This sticker should have info about the username and password

b) Try the default settings

Following are the most common default settings for CenturyLink routers.

Username
(blank)
Password
1234
IP Address
192.168.2.1
SSID (Wifi name)
-

If these settings don't work, lookup your sepcific model instead.

c) CenturyLink model lookup

Start typing in the field below and we will show you the models. (minimum 3 characters)

Don't include "CenturyLink" in search query

Step 3: How to login to your CenturyLink router

Now when you have the router's IP address and also the credentials needed, it will be a piece of cake to login to your CenturyLink router.

1. Open your browser and navigate to the IP you figured out in Step 1

In the url field simply enter the IP address that you figured out.

Sometimes the browser can misinterpret the IP address and tries to search for it instead, to fix this you should add http:// in front of the IP before hitting enter.

2. Enter the username and password for your router

This is as easy as it sounds, simply enter the username and password for your router, and click login. If all goes well you will now be logged in to your CenturyLink router and can make the modifications you want.


Step 4: Configuring your CenturyLink router

Once you are logged in to your router you can make the modifications you want.

How to configure your CenturyLink router is out of the scope of this article, but we can recommend that you always jot down the previous settings on a paper, so that you can revert changes if things stop working.


Summary

We have now shown you how to do the following:

  • Find out the IP address of your router
  • Figure out the credentials to use
  • Login to the web interface of your router

If you have questions or comments, you can leave them in the comments section below.

Discussion and comments


DMCA.com Protection Status